Windshield Defroster, Grid Line and Rear Tab Repair Kit, ConductiveX Repair Kit, 2.5gm Fast Drying Defroster Repair Pouch

Windshield Defroster, Grid Line and Rear Tab Repair Kit, ConductiveX Repair Kit, 2.5gm Fast Drying Defroster Repair Pouch

$19.99 (as of November 17, 2018, 8:11 am)

Save 1% with this coupon. Enter code ATOM1OFF at checkout.
Your coupon will be applied at amazon checkout. Details

Apperance – Silver
Cure Type – Room Temperature
Viscosity – Paste

Buy On Amazon

Description

http://conductivex.com/Windshield-Defroster-Grid-Line-and-Rear-Tab-Repair-Kit
How To Repair Your Window Defroster Grid With ConductiveX’s Defogger Repair KitWindow Defroster Grid Repair KitThe Window Defroster Grid Repair kit is an epoxy adhesive and coating formulation in response to pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of lower than 1×10-4 ohm.cm.Our Defroster/Window Grid Repair kit may be characterized by a wide operating temperature range from 50 to +170C.This Defroster/Window Grid Repair kit is really useful for grid repair, electronic bonding, or sealing applications that require both fine electrical and mechanical properties. It can Substrates also aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.How To Repair Window Defogger StripPut the measuring lead (Red) and the reference (Black) of the Multimeter on the damaged grid line at both ends, right where the grid connects with the wide bus bars. Move one probe–it’s not relevant which–to the center of the line. If you now read 6 volts, the scratch isn’t in between the two probes. If you read the same system voltage, 12 volts or so, the break is in between the old probe location and the new one. Just move the probes until you find the location that has full system voltage spanning it. Now it is time to turn off the defroster grid and the ignition switch.How To Repair The Defroster TabsClean the tab and the contact area with the alcohol prep. Then apply activator to both surfaces and let it dry.Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; on the other hand, deal with contact until adhesive is completely cured.Press the tab onto the contact area. Hold it in place until the adhesive sets up, frequently about two minutes. Wait 24 hours to use the defogger.Defrost
Apperance – Silver
Cure Type – Room Temperature
Viscosity – Paste
Dissipation Factor –
Operating Temp – From -20 to +200°F

Additional information

Brand

Item Dimensions

Label

Manufacturer

MPN

Number Of Items

Part Number

Product Group

Product Type Name

Publisher

Studio