19.7-Inch by 78.7-Inch (50x200cm) No Glue Sun Control Static Tinting Window Membrane Removable Tinting Film for Residential and Commercial Uses

19.7-Inch by 78.7-Inch (50x200cm) No Glue Sun Control Static Tinting Window Membrane Removable Tinting Film for Residential and Commercial Uses

$19.99 (as of August 18, 2018, 4:01 am)

DECREASE HEAT AND REDUCE FADING AND HEALTH RISKS: Window film is the most efficient way to reduce unwanted solar heat transferring through your windows. It can provide up 78% heat reduction, while controlling hotspots and sun-drenched areas in your home or office. And it blocks up to 99% of harmful UV rays while also significantly reducing heat. This helps protect your valuable furnishings from fading and provides a “sunscreen” for your skin against the sun.
SAVE ENERGY: Reducing temperature imbalances caused by extreme sunlight is why so many designers, architects and building engineers desire our window films. Reducing heat gain/loss will increase HVAC efficiency and lower energy costs.
ENHANCE APPEARANCE: Whether it’s a contemporary look or a uniform design, there’s a choice of window films that can aesthetically compliment the exterior of any home or office.

Buy On Amazon

Description

Ideal for residential and commercial uses, our sun keep an eye on window film is an innovative solution for privacy and decor.

Package:
1 roll 17.7-inch by 59.8-inch (45x152cm) window film (instruction included)

Installation Kit:
ruler x1
pencil x1
squeegee x1 or credit card x1
measuring tape x1
utility knife x1
water sprayer x1
rag x1

To those who may not know the way of installation:
Step 1. Measure the size of your window.
Step 2. Measure the size of the film and cut it (its single side shall be 1 to 2 cm longer than that of your window for final trim).
Step 3. Remove the film from backing paper or release liner, a paper or plastic-based film sheet (frequently applied all over the manufacturing process) (Please MAKE SURE you have removed it before you apply the window film to glass. It may be a little tricky to remove at first, but be assured there is a backing paper or release liner on all window films. Infrequently it can be a bit of a challenge to separate the paper but it is going to easily come off once you get it started.
Step 4. Spray water on your window.
Step 5. Apply the film to wet window.
Step 6. Spray water on the applied film.
Step 7. Apply the backing to the film, squeegee away water & air bubbles, and remove the backing, this way, the film will not be easily scratched.
Step 8. Clean with a rag.
Step 9. Perform final trim.

Notice:
1> If you wish to remove it, simply peel the window film from any corner. It comes off cleanly without leaving residue.
2> When not in use, the film must be replaced and stored on the original backing paper. The side of the film that touched the glass must face the glossy side of the backing paper.
3> Our film does not apply to carved, over frosted or irregular glass.

DECREASE HEAT AND REDUCE FADING AND HEALTH RISKS: Window film is the most efficient way to reduce unwanted solar heat transferring through your windows. It can provide up 78% heat reduction, whilst controlling hotspots and sun-drenched areas in your house or office. And it blocks up to 99% of harmful UV rays whilst also significantly reducing heat. This helps protect your valuable furnishings from fading and provides a “sunscreen” for your skin against the sun.
SAVE ENERGY: Reducing temperature imbalances caused by extreme sunlight is why such a lot of designers, architects and building engineers desire our window films. Reducing heat gain/loss will increase HVAC efficiency and lower energy costs.
ENHANCE APPEARANCE: Whether it’s a contemporary look or a uniform design, there’s a choice of window films that can aesthetically compliment the exterior of any home or office.
INCREASE SAFETY: Accidents, environmental effects and vandalism can instantly turn a pane of glass into life-threatening shards. Our highly durable security window films act as a “safety net” by holding shattered glass together.
STICKUP METHOD: electrostatic adherence

Additional information

Binding

Brand

Color

EAN

EAN List

Label

Manufacturer

MPN

Package Dimensions

Package Quantity

Part Number

Product Group

Product Type Name

Publisher

Studio

UPC

UPC List